Illustration USB Multi 2 S |
short description
- PC-controlled switch to switch USB devices
- USB-device with 1.9 m USB-cable
- Cuts data lines and delayed the supply lines
- behaves like USB device is handled manually
- Controlled USB connection is fully seperated from the-USB Multi 2
- Application Program Interface for easy integration
in user applications
- The control software ClewareControl for timed switching,
USBswitch with a graphical user interface and
USBswitchCmd for switching via command call is ready for
download
- No driver installation needed with Windows® Operating Systems since Windows® 2K
(® Microsoft Windows is a registered trademark of the Microsoft Corporation.)
- Linux support available.
- RoHS, CE & EN60950 conform/ IP30
- For indoor use only
- Any switch identifies with a unique serial number
- 4 years warranty
- Made in Germany
- also available devices:
- USB Multi 2 L -> cable-length ca. 3,7m
- USB Multi 2 S -> with switch for additional manuell control
- USB Multi 2 S L ->with switch for additional manuell control and cable-length ca. 3,7m
- USB Multi 2 M -> only with switch for manuell control
Description
Our USB Multi 2 is designed specifically for the field of dual use. Often it is the case that certain hardware is used at 2 system and you want to save costs, time and money by Perepherie (USB mouse, USB keyboard, USB scanner, USB printers, external hard drives, etc.) not double procures or permanently must reposition. With the USB Multi 2 you have the option to assign certain devices to one or the other device. This also saves a lot of space on the desk.
Some complex USB device sometimes crashes inside. Often the only way to get them work again is to disconnect them physically from the PC. Using the USB Multi 2, this could be done by software control.
It occasionally happens that USB devices are not compatible with each other and it leads to device conflicts. By using our USB Multi 2 you can solve the problem by turning on either one or the other USB device.
The size of the switch is about 40 x 90 x 23 mm. Left and right there are one USB socket type A and one USB socket B were located. On top of the device are one green and one red LED to display the status of the USB Multi 2.
The USB-Multi 2 should be operated in inner rooms only and should
be protected against humidity. The permissible operating temperature
range is 10° - 80° Celsius.
About 32 switches may be connected to a PC using
several HUBs. The HUBs used must use a separate power supply. When
using Cleware USB devices it is not neccessary to install device
drivers. The standard USB drivers are sufficient. So the system
stability will not be harmed.
The USB-Multi 2 will be delivered with the software ClewareControl for displaying and switching. For easy access a very simple graphical program called USBswitch controls the switch just by clicking on icons. And for integration in batch programs, a command line tool USBswitchCMD is available. The software is running with Windows®
98, Windows® 98 SE, Windows® ME, Windows® 2000, Windows®
XP and Windows® .NET. (® Microsoft Windows is a registered
trademark of the Microsoft Corporation).
For easy access a very simple graphical program also comes with the device. The program USBswitch controls the switch just by clicking on icons. And for integration in batch programs, a command line tool USBswitchCMD is available.
An application program interface (API) to drive the USB-Cutter from customer programs is part of the delivery. The API bundles
some very simple functions for opening and reading the device. The
complex USB device handling is hided.
Linux support is also available. An application
program interface (API) and a simple example for turning an USB-Multi 2 is supplied.
Please note:
PC programs may fail or may be interfeared through other programs.
Don't connect devices to the USB Multi 2 that may cause harm if the
switch turns on unexpected!
Graph
The usage of the USB-Contact is strictly prohibited when the failure of the sensor will harm people. |